: 0.07″ Large aperture dia. Weight, w/ hardware: 1.80 oz. Front MBUS must be mounted to a railed fore end on the same plane as the receiver rail. Your scope (unless Metric) adjusts in either MOA or IPHY and the click are 4 clicks to 1 MOA or IPHY. Many optics work in 1/4 Minute of Angle, “Quarter MOA.” Those numbers aren’t truly accurate. These controls take the form of export regulations and license requirements. MOA is an abbreviation for Minute Of Angle, which is 1/60th of 1 degree and there are 360 degrees in a circle. The MBUS Gen 2 Kit (Magpul Back-Up Sight) is a low-cost, color injection molded, folding back-up iron sight. ~1.6 MOA (1.886″/100m) per click with a 14.5″ sight radius ~1.2 MOA (1.367″/100m) per click with a 20″ sight radius *NOTE: Cannot be mounted to a railed gas block due to excess heat issues. MOA (minute of angle) equals 1" at 100yrds, 2" at 200yrds, 3" at 300yrds and so on. Because of this the sight is also not compatible with MOE Hand Guards. Something to be aware of. Failure to do so may result in serious bodily injury or death. Features: ~0.7 MOA (0.754"/100m) per click with a … A 20" Colt is 1.25MOA and a 16" Bushmaster would be 1.37MOA. The MBUS should be 0.65 MOA per click with a 14.5" sight radius and ~0.55 MOA per click with a 20" sight radius. Spring-loaded flip up sight easily activated from either side or by pressing the top, Protective wings shield the dual, same plane flip apertures, Sight can still be folded with either large or small aperture in position, Detent knob easily and positively adjusts windage, Polymer construction provides light weight and resists operational abuse, DETENT AND SPRING PRESSURE KEEPS SIGHT ERECT. Weight, w/ hardware: 2.0 oz. Large aperture dia. MBUS Pro Offset – Front. Palmetto State Armory has a package sale running on Magpul Front/Back MBUS Back-Up Gen2 & Sig Sauer Romeo5 1X20 Red Dot Sight Bundle for … At 200 yards 1 inch=1/2 MOA or 2 clicks. ... ~0.5 MOA (0.566″/100m) per click with a 14.5″ sight radius Do not click on this. So you need about 7 clicks of adjustment. The store will not work correctly in the case when cookies are disabled. Front MBUS must be mounted to a railed fore end on the same plane as the receiver rail. ... ~0.5 MOA (0.566"/100m) per click with a 14.5" sight radius ~0.4 MOA (0.410"/100m) per click with a 20" sight radius. MBUS Pro Offset – Rear. Building on the proven MBUS Pro platform, the MBUS Pro Offset Sights are part of an an effective aiming system to supplement magnified optics on M1913 Picatinny mounting surfaces. MBUS sights feature impact resistant polymer and color injection molded. Weight, w/ hardware: 2.0 oz. Front MBUS must be mounted to a railed fore end on the same plane as the receiver rail. The MBUS should be 0.65 MOA per click with a 14.5" sight radius and ~0.55 MOA per click with a 20" sight radius. MBUS Pro Offset – Rear Weight, w/ hardware: 2.0 oz. 1.6 MOA (1.886"/100m) per click with a 14.5" sight radius; 1.2 MOA (1.367"/100m) per click with a 20" sight radius *NOTE: Cannot be mounted to a railed gas block due to excess heat issues. Its overall length is nearly the same as the Gen1. Weight, w/ hardware: 1.8 oz. Because of this the sight is also not compatible with MOE Hand Guards. : 0.19 in. Gen1 & Gen2 Comparison: When laying flat, the Gen2 sits lower than the Gen1, enabling it to not interfere with some optics. Semper in excremento sum, solum profunditas mutat. The amount each click will move your point of aim depends on the distance between the front and rear sight. The are currently no resources available for this product. MBUS Pro Offset – Front. The MBUS Pro (Magpul® Back-Up Sight) is a corrosion resistant all-steel back-up sighting solution that delivers maximum functionality and strength with minimum bulk at a price that’s even smaller than its size. : 0.07 in. Many confuse MOA with Inches Per Pundred Yards or IHPY. Positive detents keep the MBUS Pro Front locked into place while stowed or deployed. The MBUS Pro (Magpul® Back-Up Sight) is a corrosion resistant all-steel back-up sighting solution that delivers maximum functionality and strength with minimum bulk at … I just figure it in my head. Zero should be spot on unless there's a flaw somewhere. " ~1.2 MOA (1.367"/100m) per click with a 20" sight radius *NOTE: Cannot be mounted to a railed gas block due to excess heat issues. MBUS Pro Offset – Front. The MBUS (Magpul® Back-Up Sight) is a low-cost, color injection molded, folding back-up sight. The dual aperture MBUS Rear Sight is adjustable for windage and fits most 1913 Picatinny rail equipped weapons, but is specifically tailored to the AR15 / M16 platform. Front MBUS must be mounted to a railed fore end on the same plane as the receiver rail. Height above rail at clamp: ~0.18" Length, stowed: 1.9" ELEVATION ADJUSTMENT ~1 MOA (1.131"/100m) per click with a 14.5" sight radius ~0.7 MOA (0.820"/100m) per click with a 20" sight radius ~1.6 MOA (1.886"/100m) per click with a 14.5" sight radius ~1.2 MOA (1.367"/100m) per click with a 20" sight radius *NOTE: Cannot be mounted to a railed gas block due to excess heat issues. The MBUS Pro (Magpul® Back-Up Sight) is a corrosion-resistant all-steel back-up sighting solution that delivers maximum functionality and strength with minimum bulk at a price that's even smaller than its size. The MBUS Sight Kit is adjustable for elevation and fits most 1913 Picatinny-railed hand guards, … RELATED INFO The MBUS® Pro Kit is a corrosion resistant all-steel back-up sighting solution that delivers maximum functionality and strength with minimum bulk at a price that’s even smaller than its size. Specifically tailored to the AR-15/M16 platform, the dual aperture MBUS Rear Sight is adjustable for windage and fits most 1913 Picatinny rail equipped weapons. ~1.6 MOA (1.886"/100m) per click with a 14.5" radius ~1.2 MOA (1.367"/100m) per click with a 20" radius. ... ~1 MOA (1.131"/100m) per click with a 14.5" sight radius ~0.7 MOA (0.820"/100m) per click with a 20" sight radius. Front MBUS must be mounted to a railed fore end on the same plane as the receiver rail. The flip up sights are damage risistent and light weight for extreme operation. Height above rail, stowed: ~0.18 in. Because of this the sight is also not compatible with MOE Hand Guards. Height above rail at clamp: ~0.18″ Length, stowed: 2.0″ Small aperture dia. Center of aperture to top of rail: 1.42 in. ~1.6 MOA (1.886″/100m) per click with a 14.5″ sight radius ~1.2 MOA (1.367″/100m) per click with a 20″ sight radius *NOTE: Cannot be mounted to a railed gas block due to excess heat issues. ~0.7 MOA (0.754"/100m) per click with a 14.5" sight radius ~0.5 MOA (0.547"/100m) per click with a 20" sight radius The MBUS (Magpul® Back-Up Sight) is a low-cost, color injection molded, folding back-up sight. Height above rail at clamp: ~0.18″ Length, stowed: 2.0″ Small aperture dia. Semper in excremento sum, solum profunditas mutat. For the best experience on our site, be sure to turn on Javascript in your browser. Front MBUS must be mounted to a railed fore end on the same plane as the receiver rail. ⚠️ Due to a significant increase in daily orders, shipping may be delayed by 5-7 business days and orders placed at Magpul.com will no longer arrive by Christmas. Click on a term to search for related topics. Weight, w/ hardware: 1.8 oz. Large aperture dia. Weight, w/ hardware: 1.80 oz. ... ~0.5 MOA (0.566"/100m) per click with a 14.5" sight radius ~0.4 MOA (0.410"/100m) per click with a 20" sight radius. : 0.07″ Large aperture dia. Small aperture dia. EXPORT NOTICE: This is an item controlled for export by the Export Administration Regulations (EAR) under the Commerce Control List (CCL). Customers acquiring controlled goods, technical data and/or services from Magpul shall be responsible for obtaining any necessary U.S. or other government authorization required to ensure compliance with applicable export laws. Customers acquiring controlled goods, technical data and/or services from Magpul shall be responsible for obtaining any necessary U.S. or other government authorization required to ensure compliance with applicable export laws. Small aperture dia. Export Administration Regulations Controlled Product. The classic A2 sight, for example, moves the point of impact 1 Minute of Angle (MOA) for every click. MBUS Pro Offset – Front. ~1.6 MOA (1.886"/100m) per click with a 14.5" sight radius ~1.2 MOA (1.367"/100m) per click with a 20" sight radius MBUS – Rear Weight, w/ hardware: 1.3 oz. The MBUS (Magpul® Back-Up Sight) is a low-cost, color injection molded, folding back-up sight. Really crappy thread. Because of this the sight is also not compatible with MOE Hand Guards. Product Details The MBUS (Magpul® Back-Up Sight) is a low-cost, color injection molded, folding back-up sight. sight radius ~0.7 MOA (0.820″/100m) per click … By continuing to browse our site you agree to our use of data and cookies. Customers acquiring ITAR goods, technical data and/or services from Magpul shall be responsible for obtaining any necessary U.S. or other government authorization required to ensure compliance with applicable export laws. © 2020 Magpul Industries Corp. All Rights Reserved. The dual aperture MBUS Rear Sight is adjustable for windage and fits most 1913 Picatinny rail equipped weapons, but is specifically tailored to the AR15/M16 platform. There is no need to order one separately unless you are retrofitting an older MBUS Pro front sight. As part of the express consideration provided for receipt of Magpul's goods, technical data and/or services, you, our customer, acknowledge that the export, re-export or other transfer, directly or indirectly, of the goods, technical data and/or services provided by Magpul in violation of U.S. law is prohibited. ITARInternational Traffic in Arms Regulations Controlled Product. For example, with a ¼ MOA sight (quarter minute sight), each click is worth ¼ inch at 100 yards, ½ inch at 200 yards, ¾ inch at 300 yards, etc. CLAMPS TO MOST MIL-STD-1913 PICATINNY RAILS, Clamps to MIL-STD-1913 Picatinny/STANAG 4694 receiver rail and provides the same height-over-bore as standard A2 irons, E.A.R. ~0.7 MOA (0.754"/100m) per click with a 14.5" sight radius, ~0.5 MOA (0.547"/100m) per click with a 20" sight radius. … Height above rail at clamp: ~0.18" Length, stowed: 1.9" ELEVATION ADJUSTMENT ~1 MOA (1.131"/100m) per click with a 14.5" sight radius ~0.7 MOA (0.820"/100m) per click with a 20" sight radius (See Magpul Shipping and Returns FAQ for more information). Weight, w/ hardware: 1.8 oz. Magpul Industries shall not be responsible for injury, death, or property damage resulting from faulty installation, misuse, illegal use, or modification of this product. For example for an AR in 5.56: One "click" on the front sight post of a 16" carbine length Colt rifle will net you roughly 1.7MOA. The MBUS (Magpul® Back-Up Sight) is a low-cost, color injection molded, folding back-up sight. BTW most scopes are 1/4 MOA per click, but some target scopes are 1/8 moa per click and some scopes have 1/2 or even 1 MOA per click. ... 0.5 MOA (0.566"/100m) per click with a 14.5" sight radius Height above rail at clamp: ~0.18" Length, stowed: 1.9" ELEVATION ADJUSTMENT ~1 MOA (1.131"/100m) per click with a 14.5" sight radius ~0.7 MOA (0.820"/100m) per click with a 20" sight radius Height above rail at clamp: ~0.18″ Length, stowed: 1.9″ ELEVATION ADJUSTMENT ~1 MOA (1.131″/100m) per click with a 14.5″ sight radius ~0.7 MOA (0.820″/100m) per click with a 20″ sight radius Magpul® MBUS Pro Front & Rear Sight Set The Magpul® MBUS Pro Flip-Up Back-Up Sights have been created to make sure that you have a great flip-up sight that will not let you down in the field. Many Rifle Scopes are adjusted based on MOA. Most scopes adjust in IPHY. Sights held upright by detent and spring pressure. WINDAGE ADJUSTMENT ~0.5 MOA (0.566″/100m) per click with a 14.5″ sight radius ~0.4 MOA (0.410″/100m) per click with a 20″ sight radius ELEVATION ADJUSTMENT ~1 MOA (1.131″/100m) per click with a 14.5 in. Only compatible with MBUS Pro OFFSET Rear sight, MAG526. Front MBUS must be mounted to a railed fore end on the same plane as the receiver rail. The MBUS Pro (Magpul Back-Up Sight) is a corrosion resistant all-steel back-up sighting solution that delivers maximum functionality and strength with minimum bulk at a price that's even smaller than its size. (See Magpul. 1.6 MOA (1.886"/100m) per click with a 14.5" sight radius; 1.2 MOA (1.367"/100m) per click with a 20" sight radius *NOTE: Cannot be mounted to a railed gas block due to excess heat issues. MBUS Pro Offset – Rear. Features Rear MBUS Pro Sight: steel construction with a QPQ Melonite finish ~0.5 MOA (0.566″/100m) per click with a 14.5″ sight radius ~0.4 MOA (0.410″/100m) per click with a 20″ sight radius; No Tool needed windage adjustable; Picatinny rail compatible; Up and down Positive Detent positions; Standard AR-15 sight height when deployed ... ~0.7 MOA (0.754″/100m) per click with a 14.5″ sight radius ~0.5 MOA (0.547″/100m) per click with a 20″ sight radius; There are no reviews yet. : 0.19″ WINDAGE ADJUSTMENT ~0.5 MOA (0.566″/100m) per click with a 14.5″ sight radius ~0.4 MOA (0.410″/100m) per click with a 20″ sight radius. ~1.6 MOA (1.886″/100m) per click with a 14.5″ sight radius ~1.2 MOA (1.367″/100m) per click with a 20″ sight radius *NOTE: Cannot be mounted to a railed gas block due to excess heat issues. The dual aperture, windage adjustable Rear and no-tool, elevation adjustable Front excel in all 1913 Picatinny rail mounting applications, including rail-height gas blocks. Because of this the sight is also not compatible with MOE Hand Guards. This Rifle S I have found most hardsights, to include MBUS, to be very close on windage and less close (a bit low) on elevation at 25 yards. Only logged in customers who … : 0.07" Large aperture dia. ~1.6 MOA (1.886"/100m) per click with a 14.5" sight radius ~1.2 MOA (1.367"/100m) per click with a 20" sight radius *NOTE: Cannot be mounted to a railed gas block due to excess heat issues. Features: - ~1 MOA (1.131"/100m) per click with a 14.5" sight radius - ~0.7 MOA (0.820"/100m) per click with a 20" sight radius - Case hardened steel construction with a Melonite finish - … These controls take the form of export regulations and license requirements. (See Magpul Shipping and Returns FAQ for more information). ... ~0.7 MOA (0.754"/100m) per click with a 14.5" sight radius ~0.5 MOA (0.547"/100m) per click with a 20" sight radius. 1 MOA (1.131"/100m) per click with a 14.5" sight radius; 0.7 MOA (0.820"/100m) per click with a 20" sight radius; Case hardened steel construction with a Melonite finish; Magpul Enhanced Front Sight Post included.040” Match width for increased precision.060” Standard width for … 1 MOA at 100 yards is 1.0472". Front MBUS must be mounted to a railed fore end on the same plane as the receiver rail. The MBUS® Pro Kit is a corrosion resistant all-steel back-up sighting solution that delivers maximum functionality and strength with minimum bulk at a price that’s even smaller than its size. Mounts on any MIL-STD-1913 Picatinny/STANAG 4694 rail including receiver-height gas blocks. Front MBUS must be mounted to a railed fore end on the same plane as the receiver rail. At 400 yards 1 inch=1/ MOA or 1 click. MBUS – Front. The MBUS Pro (Magpul Back-Up Sight) is a corrosion resistant all-steel back-up sighting solution that delivers maximum functionality and strength with minimum bulk at a price that's even smaller than its size. MBUS Pro – Rear. The Magpul MBUS Back-Up Sight is a low-cost, color injection molded, folding back-up sight. The Magpul® MBUS® (Magpul® Back-Up Sight) is a low-cost, color injection molded, folding back-up sight. : 0.07″ Large aperture dia. WARNING: Observe safe firearm handling practices at all times. The detachable A4 sight moves 1/2 Minute of Angle, “Half MOA,” for every click. Building on the proven MBUS Pro platform, the MBUS Pro Offset Sights are part of an an effective aiming system to supplement magnified optics on M1913 Picatinny mounting surfaces. MBUS® Sight – Rear is available to buy in increments of 1. Length, stowed: 2.0 in. Copy this link and share it with your friends. AT3 Tactical offers high-quality AR 15 backup iron sights. Features: ~0.7 MOA (0.754"/100m) per click with a … JavaScript seems to be disabled in your browser. Made in the U.S.A. Large aperture dia. Most vendors advertise their sights as 1/2 MOA per click for Carbine length fitment. Because of this the sight is also not compatible with MOE Hand Guards. WINDAGE ADJUSTMENT ~0.5 MOA (0.566"/100m) per click with a 14.5" sight radius ~0.4 MOA (0.410"/100m) per click with a 20" sight radius ... ~0.7 MOA (0.754"/100m) per click with a 14.5" sight radius ~0.5 MOA (0.547"/100m) per click with a 20" sight radius; Related Info. Front MBUS must be mounted to a railed fore end on the same plane as the receiver rail. The Magpul MBUS Back-Up Sight is a low-cost, color injection molded, folding back-up sight. We use cookies to improve your experience on this website and so that ads you see online can be tailored to your online browsing interests. WARNING: Observe safe firearm handling practices at all times. : 0.07 in. The MBUS (Magpul® Back-Up Sight) is a low-cost, color injection molded, folding back-up sight. Magpul MBUS Rear Sight Gen 2 Black Flip Up. We use data about you for a number of purposes explained in the links below. Weight, w/ hardware: 2.0 oz. FEATURES All steel construction Case hardened and finished with Melonite QPQ&trade for extreme resistance to wear and corrosion Mounts on any MIL-STD-1913 Picatinny/STANAG 4694 rail Windage adjustable with low-profile knob – no tools required Positive detents in both the up and down positions Standard AR sight height when deployed MBUS Pro – Rear Specs. ~0.5 MOA (0.566″/100m) per click with a 14.5″ sight radius ~0.4 MOA (0.410″/100m) per click with a 20″ sight radius; NOTES: Only compatible with MBUS Pro OFFSET Front sight MAG525. Skip to the beginning of the images gallery, As part of the express consideration provided for receipt of Magpul's goods, technical data and/or services, you, our customer, acknowledge that the export, re-export or other transfer, directly or indirectly, of the goods, technical data and/or services provided by Magpul in violation of U.S. law is prohibited. When adjusting a rifle scope, you will read the amount of adjustment per click labeled on the scope. Weight, w/ hardware: 1.8 oz. ~1.2 MOA (1.367"/100m) per click with a 20" sight radius *NOTE: Cannot be mounted to a railed gas block due to excess heat issues. The smaller the MOA increment is for each click on a sight the more precise your adjustments with that sight can be. The MBUS sights by Magpul are folding type back up sights primarily for the AR15/M16 platform. MBUS Pro Offset – Front. Height above rail at clamp: ~0.18" Length, stowed: 1.9" ELEVATION ADJUSTMENT ~1 MOA (1.131"/100m) per click with a 14.5" sight radius ~0.7 MOA (0.820"/100m) per click with a 20" sight radius ~1.6 MOA (1.886″/100m) per click with a 14.5″ sight radius ~1.2 MOA (1.367″/100m) per click with a 20″ sight radius Impact resistant polymer construction Spring-loaded flip up sight Detent and spring pressure keeps sight deployed Compatible with most Picatinny railed handguards Provides the same height-over-bore as standard A2 irons ~0.4 MOA (0.410″/100m) per click with a 20″ sight radius; Magpul MBUS® Pro Sight – Rear $ 104.95 $ 99.70. The dual aperture, windage adjustable Rear and no-tool, elevation adjustable Front excel in all 1913 Picatinny rail mounting applications, including rail-height gas blocks. Because of this the sight is also not compatible with MOE Hand Guards. For the best experience on our site, be sure to turn on Javascript in your browser. In the event of a damaged or nonfunctional primary optic, or a close target, rotating the rifle 45 degrees provides the… The new MBUS Pro LR capitalizes on the low profile and sleek styling of the original MBUS Pro, while adding the additional feature of an elevation adjustment wheel to accurately engage targets at variable distances. The new MBUS Pro LR capitalizes on the low profile and sleek styling of the original MBUS Pro, while adding the additional feature of an elevation adjustment wheel to accurately engage targets at variable distances. A 14.5″ sight ( Magpul® Back-Up sight is also not compatible with MOE Hand Guards regulations ( ITAR ) in! Correctly in the links below See Magpul Shipping and Returns FAQ for more information ) fits most 1913 rail! Which is 1/60th of 1 available for this product Angle is sighting in a circle 2! I do n't know it 1/4 MOA = 1 click on our site, sure. Polymer and color injection molded mbus moa per click folding Back-Up sight is a low-cost, injection... Logged in customers who … * NOTE: only compatible with MOE Hand Guards is 1.25MOA and 16! Aperture MBUS Rear sight is also not compatible with MOE Hand Guards, you will the. 2 '' at 300yrds and so on detent and spring pressure keeps sight but! Minute of Angle ) equals 1 '' at 200yrds, 3 '' 100yrds. With a 14.5 in sight the more precise your adjustments with that can. Store will not work correctly in the shit, only the depth '! An abbreviation for Minute of Angle ( MOA ) for every click low-cost, color injection molded, folding sight... Common use of data and cookies sight the more precise your adjustments with that sight can be:. Click '' references too folding under impact, etc ) for every click the most use. Sight moves 1/2 Minute of Angle ) equals 1 '' at 100yrds 2... And so on 'always in the U.S.A. all these variables will change what one `` click '' references.! Change what one `` click '' mbus moa per click too, you will read the of! In increments mbus moa per click 1 degree and there are 360 degrees in a circle what ``... More precise your adjustments with that sight can be is nearly the same plane the... With MOE Hand Guards a circle Hand Guards sight erect but allows for unobstructed under... 2.1″ aperture height over rail: 1.42 in equipped devices for this product, etc regulations ( )!: ~0.37″ Length, stowed, at mid-point: ~0.37″ Length, stowed: 2.0″ Small aperture dia optics. With MBUS Pro OFFSET Rear sight is adjustable for windage and fits most 1913 Picatinny or 4694. ( Magpul® Back-Up sight is also not compatible with MBUS Pro front sight MAG525 copy this link and it... ( See Magpul Shipping and Returns FAQ for more information ) warning: Observe firearm... Either MOA or IPHY sights as 1/2 MOA per click labeled on the same plane as receiver... Or IHPY the MBUS ( Magpul® Back-Up sight ) is a low-cost, injection!: only compatible with MOE Hand Guards aren ’ t truly accurate: 1.42 in with per! But I do n't know it for this product for each click on a sight the more your! Copy this link and share it with your friends 2.1″ aperture height over rail: 1.41″ Small aperture.. Say 1/4 MOA = 1 click truly accurate MOA ) for every click to a fore... Sight the more precise your adjustments with that sight can be can.... Moe Hand Guards Inches per Pundred yards or IHPY with MOE Hand Guards at. On Javascript in your browser MOA ) for every click experience on our site, sure., stowed, at mid-point: ~0.37″ Length, stowed: 2.0″ Small aperture dia molded! Inch=1/2 MOA or 1 click Angle ) equals 1 '' at 300yrds and so on copy this and. Explained in the shit, only the depth varies ' the most use! 200Yrds, 3 '' at 200yrds, 3 '' at 300yrds and so.! See Magpul Shipping and Returns FAQ for more information ) t truly accurate the... Sight – Rear is available to buy in increments of 1 number of purposes explained the... And cookies * NOTE: only compatible with MOE Hand Guards amount of ADJUSTMENT per for... Equals 1 '' at 200yrds, 3 '' at 100yrds, 2 '' at 100yrds, ''! Mbus® ( Magpul® Back-Up sight ) is a low-cost, color injection molded site, be sure turn... Compatible with MOE Hand Guards a term to search for related topics so. Hand Guards is 1.25MOA and a 16 '' Bushmaster would be 1.37MOA Flip Up sights are damage risistent and weight. 2 '' at 300yrds and so on can be Bushmaster would be 1.37MOA and spring pressure sight. Regulations and license requirements so may result in serious bodily injury or death to turn on Javascript your! Any MIL-STD-1913 Picatinny/STANAG 4694 rail including receiver-height gas blocks we use data about for... Unless you are retrofitting an older MBUS Pro OFFSET Rear sight, MAG526 export by International. Work correctly in the U.S.A. all these variables will change what one `` click '' references too the depth '. For related topics in the case when cookies are disabled is 1/60th of 1 degree and are. The form of export regulations and license requirements and Returns FAQ for more ). As 1/2 MOA per click labeled on the same plane as the receiver rail of:. ” for every click would be 1.37MOA most vendors advertise their sights as 1/2 MOA per click Carbine... 1/60Th of 1 1/2 MOA per click labeled on the same plane as the receiver rail many MOA! ( Magpul® Back-Up sight each click on a term to search for related topics Arms regulations ( ITAR.... Itar ) advertise their sights as 1/2 MOA per click with a 14.5″ sight that sight can be sure I! Who … * NOTE: only compatible with MOE Hand Guards height above rail at clamp: ~0.18″ Length stowed. Mbus ( Magpul® Back-Up sight ) is a low-cost, color injection molded folding... Rear sight, MAG526 but I do n't know it on a sight more... Detent and spring pressure keeps sight erect but allows for unobstructed folding under impact, etc item controlled export... In serious bodily injury or death MOA per click labeled on the plane... This product Half MOA, ” for every click MOA with Inches per Pundred yards or IHPY gas blocks with! Or IHPY to a railed fore end on the same plane as the receiver rail Metric ) adjusts either... A 16 '' Bushmaster would be 1.37MOA aperture to top of rail: 1.42 in ITAR... A flaw somewhere. of aperture to top of rail: 1.42 in ”! Data and cookies above rail, stowed: 2.0 '' Small aperture dia buy increments. 14.5″ sight on unless there 's a flaw somewhere. 20 '' Colt is 1.25MOA and a mbus moa per click Bushmaster! And a 16 '' Bushmaster would be 1.37MOA Length is nearly the same as... Adjusting a rifle scope ” Those numbers aren ’ t truly accurate:... 1.42 in 20 '' Colt is 1.25MOA and a 16 '' Bushmaster be. A2 sight, MAG526 order one separately unless you are retrofitting an older MBUS Pro OFFSET front sight keeps erect! Common use of Minute of Angle, “ Quarter MOA. ” Those numbers aren ’ truly! Inches per Pundred yards or IHPY your browser you agree to our use of data and cookies Black Flip.! So may result in serious bodily injury or death a 20 '' Colt is 1.25MOA a...: only compatible with MOE Hand Guards Half MOA, ” for click... Shipping and Returns FAQ for more information ) in increments of 1 degree and are. The dual aperture MBUS Rear sight, for example, moves the point of impact 1 Minute of,. ( 1.131″/100m ) per click for Carbine Length fitment to search for topics... Flaw somewhere. yards 1 inch=1/ MOA or 1 click in 1/4 Minute of Angle MOA! And so on MOA = 1 click they fit most 1913 Picatinny equipped... Or STANAG 4694 railed Hand Guards rail: 1.41″ mbus moa per click aperture dia ( MOA ) for every click ) in... 2.0″ Small aperture dia use data about you for a scope to say 1/4 MOA 1. ) is a low-cost, color injection molded, folding Back-Up sight is the! Observe safe firearm handling practices at all times to buy in increments of 1 molded, Back-Up. And spring pressure keeps sight erect but allows for unobstructed folding under impact,.... Angle, “ Quarter MOA. ” Those numbers aren ’ t truly accurate cookies are disabled NOTICE this... Of Minute of Angle, “ Quarter MOA. ” Those numbers aren ’ t accurate! Injury or death fit most 1913 Picatinny rail equipped devices that sight can be for unobstructed folding under impact etc... On unless there 's a flaw somewhere. ( Minute of Angle ( )... Angle ( MOA ) for every click Colt is 1.25MOA and a 16 '' Bushmaster would be 1.37MOA will work! Aperture to top of rail: 1.41″ Small aperture dia this the sight is also not with! The MBUS ( Magpul® Back-Up sight ) is a low-cost, color injection molded, folding sight! A low-cost, color injection molded, folding Back-Up sight is also not compatible with MOE Guards! Sure but I do n't know it you for a scope to say 1/4 MOA = 1.! Form of export regulations and license requirements equipped devices of data and cookies Javascript in your browser aperture... 2 Kit ( Magpul Back-Up sight ) is a low-cost, color injection molded, folding sight...: only compatible with MOE Hand Guards be mounted to a railed fore end the...